Overview - Windshield Washer System, Without Side Auxiliary Cooler

Fig 1: Exploded View Of Windshield Washer System, Without Side Auxiliary Cooler

Courtesy of AUDI OF AMERICA, LLC

1. Windshield Washer Fluid Reservoir
   • With Windshield Washer Fluid Level Sensor -G33- Cannot be replaced separately if faulty.
   • Removing and installing. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING, AUDI A3 WITHOUT SIDE AUXILIARY COOLER .
2. Nut
   • 8 Nm
3. Filler Tube
   • Removing and installing. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING, AUDI A3 WITHOUT SIDE AUXILIARY COOLER .
4. Filler Tube
   • For the windshield washer fluid reservoir
   • Removing and installing. Refer to WINDSHIELD WASHER FLUID RESERVOIR FILLER NECK, REMOVING AND INSTALLING, AUDI A3 WITHOUT SIDE AUXILIARY COOLER .
5. Screen
6. Cap
   • For the filler neck
7. Expanding Clip
8. Right Spray Nozzle
   • Vehicle equipment version with Right Washer Nozzle Heater -Z21-
   • Removing and installing. Refer to SPRAY NOZZLES, REMOVING AND INSTALLING .
   • Adjusting. Refer to appropriate service information.
9. Left Spray Nozzle
   • Vehicle equipment version with Left Washer Nozzle Heater -Z20-
   • Removing and installing. Refer to SPRAY NOZZLES, REMOVING AND INSTALLING .
   • Adjusting. Refer to appropriate service information.
10. Grommet
    • For the windshield washer fluid hose inside the hood
11. Nut
    • 8 Nm
    • Quantity: 2
12. Windshield And Rear Window Washer Pump -V59-
    • Removing and installing. Refer to Windshield And Rear Window Washer Pump -V59-, REMOVING AND INSTALLING, AUDI A3 WITHOUT SIDE AUXILIARY COOLER .
13. Water Hose
    • For the windshield washer system
14. Grommet
    • Replace if damaged.