Overview - Backrest Cover And Cushion, Super Sport Seat

NOTE:

A version with a leather cover with backrest release lever is shown.

Fig 1: Exploded View Of Backrest Cover And Cushion, Super Sport Seat

Courtesy of AUDI OF AMERICA, LLC

Upholstery Clip
- For securing the cover to the cushion
- Replace after removing.
- Install at the same location with Upholstery Clip Pliers:VAG1634 .
Molding
- Sewn into cover
- For attaching the cover to the backrest frame
- Make sure it fits correctly inside the backrest frame
Cover
- Allocation. Refer to the Parts Information.
- Covers and Cushions, Removing and Installing. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, SUPER SPORT SEAT .
- Cover and Cushion, Separating. Refer to BACKREST COVER AND CUSHION, SEPARATING .
- Check that there are no folds after installing
Opening
- For thorax airbag
- Sewn into cover
Backrest Frame
Cushion
- Allocation. Refer to the Parts Information.
- Covers and Cushions, Removing and Installing. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, SUPER SPORT SEAT .
- Cover and Cushion, Separating. Refer to BACKREST COVER AND CUSHION, SEPARATING .
- Is secured with two double side adhesive strips on the backrest frame.
- Versions with seat heating: attach a new heating element when replacing. Refer to DRIVER/FRONT PASSENGER BACKREST HEATING ELEMENT -Z7- / -Z9-, REMOVING AND INSTALLING, SUPER SPORT SEAT .