Parking Aid Control Module - J446-, Removing And Installing
NOTE:
If replacing the control module, select the "Replace Control Module" function using the -Vehicle Diagnostic Tester-.
Removing
- Remove the driver side instrument panel cover. Refer to → Driver Side Instrument Panel Cover, Removing and Installing.
- If equipped, release the retainer -2- in direction of -arrow- and remove the cover -1- downward.
- Disconnect the connectors -1 and 2- by pressing the tab, turning the retaining bracket and disconnecting the connector.
- Release the tab -arrow- and remove the control module -3- downward from the bracket.
Installing
Install In Reverse Order Of Removal.