Towing Recognition Control Module -J345-, REMOVING AND INSTALLING, 3-DOOR AND 5-DOOR VEHICLES: Removing
-- Remove the left luggage compartment side trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .
-- Manual trailer hitch: pull off the frame -2- slightly from the threaded pin -1-.
-- Disconnect the connectors -3 and 5-.
-- Release the retaining tab -6- in direction of -arrow- and remove the towing recognition control module -4- from the frame.
-- Electric trailer hitch: pull off the frame -2- slightly from the threaded pin -1-.
-- Disconnect the connectors -3, 5, 6 and 7-.
-- Open the tab -arrow- and remove the towing recognition control module -4- from the frame.