Sunroof Frame, Removing And Installing: Notes

CAUTION:

It is necessary to program the mechanical components or control modules on the sliding/tilting sunroof after removing and installing them using Guided Functions in Guided Fault Finding at diagnostic address 09 with the Vehicle Diagnostic Tester. .

Special tools and workshop equipment required

Window Cutter:VAG1561A
Window Cutter - L Blade (2 pc.):VAG1561/22
Double Cartridge Adhesive Gun:VAS5237

Materials

Two-Part Window Adhesive Kit:D 004 660 M2 . Refer to ⁽¹⁾.

One-Part Window Adhesive:DH 009 100 A2 . Refer to ⁽²⁾.

⁽¹⁾	Observe the minimum curing time. Refer to INSTALLING .

⁽²⁾	Small cartridge (180 ml) for sealing and/or when a 400 ml double cartridge is not sufficient.

To process this material, the :VAS5237 must be used.