Headrest Cover And Cushion, Removing And Installing: Removing

Fig 1: Locating Side Locks

Courtesy of AUDI OF AMERICA, LLC

-- Remove the headrest. Refer to HEADREST, REMOVING AND INSTALLING .

-- Open the side closures -arrows- on the cover -1-.

-- Insert the Trim Removal Wedge :3409 or a flat-head screwdriver between the closure -1- in -direction of arrow A-.

Fig 2: Opening Side Locks

Courtesy of AUDI OF AMERICA, LLC

-- Tension the lower U-channel -3- in -direction of arrow B-.

-- Remove the upper side of the cover with the flat channel -2- from the U-channel.

-- Open the zipper by inserting the Trim Removal Wedge :3409 or a flat-head screwdriver between the zipper and the cover.

Fig 3: Opening Main Lock

Courtesy of AUDI OF AMERICA, LLC

-- Tension the lower U-channel -1- in -direction of arrow A-.

-- Remove the upper side of the cover with the flat channel -2- from the U-channel -1-.

NOTE:

The cover must be completely open to remove the cushion.

-- Remove the cover and cushion from the headrest support.

-- Remove the cushion -1- out of the cover -2-.

Fig 4: Identifying Cover Padding

Courtesy of AUDI OF AMERICA, LLC