Overview - Cover And Cushion, Rear Seat Backrest Without A Pass-Through

NOTE:

A right 2/3 rear seat backrest is shown in the overview.

Fig 1: Exploded View Of Cover And Cushion, Rear Seat Backrest Without A Pass-Through

Courtesy of AUDI OF AMERICA, LLC

1. Cover
   • Vehicles with:
     • Fabric
     • Leather
   • Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING .
   • Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, REAR SEAT BACKREST .
   • Allocation. Refer to the Parts Information.
   • Check that there are no folds after installing
2. Upholstery Clip
   • For securing the cover to the cushion
   • Replace after removing.
   • Install at the same location with Upholstery Clip Pliers:VAG1634  .
3. Backrest Frame
   • Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING .
4. Cushion
   • Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING .
   • Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, REAR SEAT BACKREST .
   • Allocation. Refer to the Parts Information.
5. Clamping Strip
   • Sewn into cover
   • For attaching the cover to the backrest frame