Overview - Rear Seat Backrest, Pass-Through Door

Fig 1: Exploded View Of Rear Seat Backrest, Pass-Through Door

Courtesy of AUDI OF AMERICA, LLC

1. Center Cushion
   • Allocation. Refer to the Parts Information.
   • Removing and Installing. Refer to CENTER CUSHION, REMOVING AND INSTALLING, BACKREST WITH PASS-THROUGH .
   • Engage the cushion to the pass-through door and press on it until it clicks into place.
2. Center Armrest
   • Removing and Installing. Refer to CENTER ARMREST, REMOVING AND INSTALLING .
3. Pass-Through Door
   • Removing and Installing. Refer to PASS-THROUGH DOOR, REMOVING AND INSTALLING .
4. Door Locking Mechanism Trim
   • Removing and Installing. Refer to PASS-THROUGH COVER FRAME, REMOVING AND INSTALLING .
   • Press on until it engages audibly
5. Stop Strip
   • Clipped into the rear seat backrest
   • Removing and Installing. Refer to PASS-THROUGH COVER FRAME, REMOVING AND INSTALLING .
   • Press on until it engages audibly
6. Pass-Through Cover Frame
   • Clipped into the rear seat backrest
   • Removing and Installing. Refer to PASS-THROUGH COVER FRAME, REMOVING AND INSTALLING .
   • Push in the rear seat backrest until it engages audibly.
7. Right 2/3 Rear Seat Backrest
   • Allocation. Refer to the Parts Information.
8. Bolt
   • Quantity: 2
   • Self-locking
   • Always replace after removing
   • Threaded holes for the bolts must be cleaned, for example, with a thread tap
   • Tightening specification Refer to OVERVIEW - CENTER ARMREST .
9. Bolt
   • Quantity: 2
   • 9 Nm