Overview - Rear Seat Backrest, Pass-Through Door

Fig 1: Exploded View Of Center Armrest Components

Courtesy of AUDI OF AMERICA, LLC

1. Center Cushion
   • Removing and Installing. Refer to CENTER CUSHION, REMOVING AND INSTALLING, BACKREST WITH PASS-THROUGH .
   • Engage the cushion to the pass-through door and press on it until it clicks into place.
2. Center Armrest
   • Removing and Installing. Refer to CENTER ARMREST, REMOVING AND INSTALLING .
3. Lid
   • For pass-through
   • Removing and Installing. Refer to PASS-THROUGH DOOR, REMOVING AND INSTALLING .
4. Trim
   • for the rear lid locking mechanism
   • Removing and Installing. Refer to PASS-THROUGH COVER FRAME, REMOVING AND INSTALLING .
   • Press on until it engages audibly
5. Stop Strip
   • Clipped into the rear seat backrest
   • Removing and Installing. Refer to PASS-THROUGH COVER FRAME, REMOVING AND INSTALLING .
   • Press on until it engages audibly
6. Cover Frame
   • For pass-through
   • Clipped into the rear seat backrest
   • Removing and Installing. Refer to PASS-THROUGH COVER FRAME, REMOVING AND INSTALLING .
   • Push in the rear seat backrest until it engages audibly.
7. Right 2/3 Rear Seat Backrest
8. Bolt
   • Quantity: 2
   • Self-locking
   • Replace after removing.
   • Threaded holes for the bolts must be cleaned, for example, with a thread tap
   • Tightening specification. Refer to OVERVIEW - CENTER ARMREST 
9. Bolt
   • 9 Nm 
   • Quantity: 2