LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S3 Prestige >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers >> 63 Bumpers >> Front Bumper >> Attachments, Removing And Installing >> Cover Strip, Removing And Installing >> Removing

Cover Strip, Removing And Installing: Removing

-- Loosen the wheel housing liner in at the front and move it to the side. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Release the retainers in direction of -arrows-.

GWWA63-11141Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover strip -1- toward the front.



-- Remove the left and right spoiler lower section. Refer to SPOILER LOWER SECTION, REMOVING AND INSTALLING, RS3 SEDAN, RS3 SPORTBACK FROM MY 2019 .

-- Release the retainers -3-.

GWWA63-11369Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover strip -1- from the bumper cover in direction of -arrow-.