Plenum Chamber Cover, Removing And Installing: Removing

-- Remove the windshield wiper arms. Refer to WINDSHIELD WASHER SYSTEM .

-- Remove the seal -1-.

Courtesy of AUDI OF AMERICA, LLC

-- RS3: open the filler neck cap.

-- Coat the transition between the windshield -2- and the plenum chamber cover -5- with some soapy water. Starting at the window edge, carefully remove the plenum chamber cover vertically upward from the retainer on the windshield.

-- Remove the plenum chamber cover -5- by carefully removing the plenum chamber cover tab -3- in the direction of -arrow- from the windshield mount -4-.