Cigarette Lighter -U1-, REMOVING AND INSTALLING: Installing

Install in the reverse order of removal. Note the following:

CAUTION:

Risk of injury.

After removing the Cigarette Lighter Release Tool: T40148 , check to see if the lighter retaining tabs are bent.
If the retaining tabs are bent, bend them back so the lighter does not slide out.

-- Remove the support -1- on the Cigarette Lighter Release Tool: T40148 .

Fig 1: Identifying Support, Thumbwheel, Release Tabs, Release Tool T40148 & Cigarette Lighter

Courtesy of AUDI OF AMERICA, LLC

-- Slide the piston down and hold it in place.

-- Rotate the thumbwheel -4- on the Cigarette Lighter Release Tool: T40148 counterclockwise in direction of -arrow-. This loosens the release tabs -2- on the cigarette lighter -3- so the Cigarette Lighter Release Tool: T40148 can be removed.