Fuse Panel B -SB- IN E-BOX, REMOVING AND INSTALLING: Removing
-- With the ignition switched off, disconnect the ground cable from the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING, ENGINE COMPARTMENT BATTERY .
-- Air filter housing in front of the battery: Remove the air filter housing. Refer to the appropriate Multiport Fuel Injections article - Air Filter Housing, Removing and Installing .
-- Press the release buttons in direction of -arrow- and remove the cover -1- for the engine compartment E-box.
-- Open the tab -2- with a screwdriver, and remove the front cover -1- upward in direction of -arrow-.
-- When installing, identify the wires on the threaded connectors.
-- Remove the nuts -1, 2, 4, 5 and 6- and bolt -3- and free up the wire -arrow-.
-- Cut the lower cable ties on the wiring harness.
-- Release the catches -1, 2 and 4- -arrow- and remove the fuse panel B -3-.