Crimping Pliers -.35-2.5mm:VAS1978/1A
The Crimping Pliers -.35-2.5mm :VAS1978/1A or the Wiring Harness Repair - Crimping Plier - Base Tool :VAS1978/1-2 together with the Wiring Harness Repair - Crimping Head -.35-2.5mm :VAS1978/1-1 , the Wiring Harness Repair - Interchangeable Head :VAS1978/1-3 , or the :VAS1978/2A are used to press the crimp connector from the wiring harness-repair kit.
Crimp connectors, press using the Crimping Pliers -.35-2.5mm :VAS1978/1A .
The following crimping heads are available for the Wiring Harness Repair - Crimping Plier - Base Tool :VAS1978/1-2 :
- Wiring Harness Repair - Interchangeable Head :VAS1978/1-3
- Wiring Harness Repair - Crimping Head -.35-2.5mm :VAS1978/1-1
- Wiring Harness Repair Set - Crimping Head - 4-6mm :VAS1978/2A
- Wiring Harness Repair Set - Crimping Head - JPT :VAS1978/9-1
In conjunction with Wiring Harness Repair Set - Crimping Head - JPT :VAS1978/9-1 , crimping pliers are used to crimp terminals onto individual wires when repairing wiring cross-sections up to 0.35 mm2 .
Changing the Crimping Head:
-- Open crimp pliers completely.
-- Disengage both locking pins in the direction of -arrows- from crimp pliers basic tool.
-- Insert the required crimping head from above in the direction of -arrow- in crimp pliers basic tool.
-- Lock the crimping head by pressing in the pins in the direction of -arrows- into crimp pliers basic tool.