LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S3 Prestige >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> Wires -- (A3 Sedan) >> 97 Wires >> Vehicle Diagnosis, Testing And Information Systems >> Vehicle Diagnostic Tester, Connecting >> Procedure

Vehicle Diagnostic Tester, Connecting: Procedure

-- Engage the parking brake or operate the electromechanical parking brake.

-- Shift the shifter lever into neutral or place the selector lever in the "P" position.

-- Turn off the ignition and connect the Vehicle Diagnostic Tester to the Data Link Connector (DLC) with the diagnostic cable -arrow-.

GWWN90-10017Courtesy of AUDI OF AMERICA, LLC

-- When using the :VAS5054A  or the :VAS5055  pay attention to the Operating Instructions.

-- Turn on the ignition.

-- Turn off all electrical consumers.

NOTE:

If a error message appears on the screen of the Vehicle Diagnostic Tester. Refer to the Operating Instructions.

scientia non olet · About LEMON Manuals