Headlamp Washer Pump -V11-, Removing And Installing, AUDI RS3: Removing

-- Remove the washer fluid reservoir. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING, AUDI RS3 .

-- Disconnect the connector -4-.

Courtesy of AUDI OF AMERICA, LLC

-- Place a drip tray under the washer fluid reservoir.

-- Press the release button -1- and remove the washer fluid hose -2- from the Headlamp Washer Pump -V11- -item 3-.

-- Remove the headlamp washer pump upward and out of the washer fluid reservoir.