AUDI Radio Can (I7X), Through My 2016

1. Connection, AM/FM1/FM2
2. 4-Pin Connector -T4al- to the Front Information Display Control Head -J685-
3. Connection block with four multi-pin connectors

1. Connector 2, AM/FM1 from Antenna Amplifier -R24-, Antenna -R11-
2. Connector 1, FM2 from Antenna Amplifier 2 -R111- or Antenna Amplifier 3 -R112-, Radio Antenna 2 -R93-

All pins are connected to the Front Information Display Control Head -J685-.

1. LVDS (-)
2. Not Assigned
3. LVDS (+)
4. Ground

3  - Connection Block with Four Multi-Pin Connectors

1. Right Rear Speaker (+)
2. Right Front Speaker (+)
3. Left Front Speaker (+)
4. Left Rear Speaker (+)
5. Right Rear Speaker (-)
6. Right Front Speaker (-)
7. Left Front Speaker (-)
8. Left Rear Speaker (-)

B  - Not Assigned

1  - LF-In ground from the External Audio Source Connection -R199-

2  - Right LF-In from the External Audio Source Connection -R199-

7  - Left LF-In from the External Audio Source Connection -R199-

8  - LF-In ground shielding

17  - Terminal 31

18  - Terminal 30

1  - CAN bus high to the Multimedia System Control Head -E380- /Front Information Display Control Head -J685-

2  - Reset Multimedia System Control Head -E380-

6  - CAN bus high, Infotainment

7  - CAN bus low to the Multimedia System Control Head -E380- /Front Information Display Control Head -J685-

8  - Reset (Information Electronics Control Module 1 -J794-) from Multimedia System Control Head -E380-

12  - CAN bus low, Infotainment