Pass-Through Cover Frame, Removing And Installing: Removing
-- Fold down the center armrest and open the pass-through door.
-- Unclip the trim -1- from the rear seat backrest using the Trim Removal Wedge: 3409 -arrows-.
-- Use the Hook Tool: T40207 to remove the retaining tabs -2- alternating between the sides.
-- Pry off the cover frame -2- using the Trim Release Lever: T10039/1 from the rear seat backrest -1- -arrow A-.
-- Continue prying off starting at the upper left corner in -direction of arrow B-.
-- Remove the pass-through cover frame.
-- Push the cover with cushion slightly aside, and unclip the stop strip -1- from the rear seat backrests -arrows-.
-- Remove the stop strip.