Bench Seat/Single Seat, Removing And Installing: Installing

Fig 1: Identifying Seat Mounting Grommets

Courtesy of AUDI OF AMERICA, LLC

Install in the reverse order of removal while noting the following:

-- Check the body openings -arrow- for deformations.

-- In the case of deformation, readjust the panel with a plastic hammer.

-- Lift the carpet -2- and press in new mounting grommets -1- until they engage audibly in body opening -arrow-.

-- Place the carpet around the grommet as shown.

-- Check if the wire frame is aligned in the marked area -arrow- before installing the bench seat.

Fig 2: Inspecting Wire Frame

Courtesy of AUDI OF AMERICA, LLC

-- If the wire frame is bent, bend it back far enough until it is realigned.

-- Install the bench seat and push the wire hooks into the mounting grommets.

-- Make sure the wire hooks are engaged correctly in the grommets.