Overview - Front Backrest, Super Sport Seat

Fig 1: Exploded View Of Front Backrest, Super Sport Seat

Courtesy of AUDI OF AMERICA, LLC

Seat Pan
Entry Assistance Release Cable
- Only three doors: manual seat
- Quantity: 2
- Removing and Installing. Refer to ENTRY ASSISTANCE RELEASE CABLE B, REMOVING AND INSTALLING and Refer to ENTRY ASSISTANCE RELEASE CABLE A, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- Self-locking
- Always replace after removing
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
- 33 Nm
Front Backrest
- Removing and Installing. Refer to FRONT BACKREST, REMOVING AND INSTALLING .
Retaining Channel
- For cover and cushion
Backrest Cover
- Versions with cargo net: the cargo net cannot be separated from the backrest cover.
- Removing and Installing. Refer to BACKREST COVER, REMOVING AND INSTALLING, SUPER-SPORT SEAT .
- Attach under the backrest frame and then press on it until it engages audibly
- Clipped in the headrest
Bolt
- Only with backrest release
- Tightening specification -item : Bolt.
Backrest Release
- only A3
- Removing and Installing. Refer to BACKREST RELEASE, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- Self-locking
- Always replace after removing
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
- 33 Nm
Wiring Harness
- From the thorax airbag to the connector station
- Depending on the equipment version, there may be more wiring harnesses, such as for backrest heating and lumbar support