Backrest Cover, Removing And Installing, Super-Sport Seat: Removing
Vehicle Versions with Backrest Release/Entry Assistance.
-- Remove the backrest release trim. Refer to BACKREST RELEASE TRIM, REMOVING AND INSTALLING, SUPER SPORT SEAT .
-- Remove the bolt -1-.
Continuation for all Seat Versions:
-- Lift out the clamping strip -1- for the cover from the backrest cover and remove the areas around the headrest from the backrest cover -arrow-.
Vehicle versions without backrest release/entry assistance:
-- Pull the cover with the cushion as far forward as possible until the retaining tab is accessible.
-- Push down the retaining tabs -1- with a screwdriver and pull the backrest cover from the bracket.
Continuation for all Seat Versions:
-- Unclip the upper backrest cover -1- beginning from the headrest -arrow A-.
-- Loosen the side retaining tabs -B arrows- and remove the backrest cover upward from the backrest.