Headrest Guide, Removing And Installing: Installing

NOTE:

The headrest guide can only be inserted in one position.

The tab -3- on the headrest guide must engage in the mount cut-out on the backrest frame.
The tab(s) must engage correctly in backrest frame.

WARNING:

Follow all safety precautions when working on pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
Follow all the instructions when installing the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

Further Installation Is The Reverse Order Of Removal.