Right/Left MULTIFUNCTION Buttons On Steering Wheel -E441- / -E440-, Removing And Installing, 4-Spoke Steering Wheel: Notes

Special tools and workshop equipment required 

• Trim Removal Wedge: 3409 
  Fig 1: Identifying Trim Removal Wedge

  Courtesy of AUDI OF AMERICA, LLC
• Torque Screwdriver: V.A.G 1624 
  Fig 2: Identifying Torque Screwdriver VAG1624

  Courtesy of AUDI OF AMERICA, LLC

The multifunction buttons -2- are attached to the trim molding -1-. The decorative trim -1- and the multifunction buttons -2- are attached to the steering wheel. The multifunction buttons -2- have an extra retainer -3-.

When removing, first make sure the decorative trim -1- can be loosened by hand (approximately 5 mm). Then using the Trim Removal Wedge: 3409  , open the retainers -3- on the multifunction buttons -2- and remove the decorative trim -1- together with the multifunction buttons -2-.

Decorative trim retainers

1. Decorative Trim

Arrows - catches

Multifunction button catches

1. Multifunction Button
2. Retainer

-- Turn off the ignition and all electrical equipment and remove the ignition key.