Antenna Amplifier 4 -R113-, REMOVING AND INSTALLING, CONVERTIBLE: Removing

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Remove the right A-pillar trim panel. Refer to OVERVIEW - A-PILLAR TRIM PANEL .

-- Release and disconnect the connectors -2- and -4- from the Antenna Amplifier 4 -R113- -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Only loosen the screw -3- (do not remove) and remove the Antenna Amplifier 4 -R113- -1- from the A-pillar.