TV Antenna Amplifier 2 -R83-, Removing And Installing, Convertible: Removing

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Remove the left A-pillar trim panel. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- Release and disconnect the connectors -2 and 4- from the TV Antenna Amplifier 2 -R83- -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Only loosen the screw -3- (do not remove) and remove the TV Antenna Amplifier 2 -R83- -1- from the A-pillar.