Front Parking Aid Sensors -G252-/- G253-/-G254-/-G255-, Removing And Installing Through My 2016: Removing
Outer Sensors
- Remove the air intake grille. Refer to
- Vehicle equipment version with fog lamps: Remove the fog lamp. Refer to 2.2 Fog Lamp, Removing and Installing. .
- Press both tabs in direction of -arrows- to the side and press the sensor -3- inward from the outside.
- Disconnect the connector -2- by sliding the retainer -1- back and pressing the release down.
Inner Sensor
- Disengage the mount -4- for the front parking aid sensor in the direction of -arrow A-.
- Press both tabs to the side in direction of -arrows B- and remove the sensor -3- from the mount -1- at the same time.
- Disconnect the connector -2- by sliding the retainer back and pressing the release down.