LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S3 Prestige >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Parking Aid System >> 11 Parking Aid >> Rear Parking Aid Sensor, Removing And Installing >> Installing

Rear Parking Aid Sensor, Removing And Installing: Installing

Install in the reverse order of removal. Note the following:

NOTE: Vehicle equipment version with lane change assistance: If the bumper cover was removed, the lane change assistance must be calibrated. Refer to 6.4 LANE CHANGE ASSISTANCE, CALIBRATING .