Spring, Removing And Installing, Multi-Link Suspension: Removing
-- Remove the wheel. Refer to WHEELS AND TIRES .
-- Press the tabs -arrows- on the assembly aid -1- inward.
-- Remove the assembly aid -1- upward.
-- Install the spring tensioner -3-.
- :VAG1752/3A
- :VAG1752/9
- :VAG1752/1
- Spring
WARNING:
Make sure that coil spring is seated correctly in the :VAG1752/3A -1- (danger of accident).
-- Compress coil spring until it can be removed.
NOTE:
Use a wrench or a reversible ratchet to tighten the spring compressor.
-- Remove spring.
WARNING:
Make sure the coil spring is seated correctly in the :VAG1752/3A -arrow- (danger of accident).