LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (EXHAUST SYSTEM, EMISSION CONTROLS [4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI ENGINE] -- (A3)) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Muffler, Removing And Installing >> Muffler, Removing And Installing, Fwd Vehicles >> Removing

Muffler, Removing And Installing, Fwd Vehicles: Removing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear tunnel brace -2-. Refer to UNDERBODY TRIM PANEL .

GWWA66-11057Courtesy of AUDI OF AMERICA, LLC

-- Loosen the clamping sleeve -arrow- and push it toward the rear.

GWWA26-11256Courtesy of AUDI OF AMERICA, LLC

-- Disengage the mounting -2- from the exhaust system rear section.

GWWA26-11275Courtesy of AUDI OF AMERICA, LLC
WARNING:

Risk of accident due to the weight of the muffler.

  • A second technician is required to remove the rear muffler.

-- Remove the bolts -3- left and right as well as bolt -4- and remove the muffler -1-.