LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (EXHAUST SYSTEM, EMISSION CONTROLS [4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI ENGINE] -- (A3)) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Exhaust System, Installing Without Tension >> Tail Pipes, Aligning >> Procedure

Tail Pipes, Aligning: Procedure

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Align the rear muffler so that the space between the opening for the bumper and the tail pipes is the same.

Vehicles with 1.8L Engine: 

GWWA26-11350Courtesy of AUDI OF AMERICA, LLC

Vehicles with 2.0L Engine: 

GWWA26-11357Courtesy of AUDI OF AMERICA, LLC

-- Loosen the rear muffler to align the tail pipes.