Radiator, Removing And Installing: Removing
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING WITHOUT COOLING SYSTEM CHARGE KIT - ELECTRIC VACUUM PUMP .
-- Remove the front bumper cover. Refer to FRONT BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the bolts -1 and 3-.
-- Open the retainer in direction of -arrow- and remove the cover -2-.
-- Free up the coolant hose -2-.
-- Open the retaining tabs -arrows-, remove the upper air duct -1-.
-- Remove the left and right bolts -arrow-.
-- Unclip and remove the air duct lower section -1-.
-- Remove fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .
Vehicles With Radiator Versions 1 & 2
-- Lift the clamp -arrow- and remove the upper right coolant hose from the charge air cooling circuit cooler.
All Vehicles
-- Lift the clamp in direction of -arrow- and remove the upper left coolant hose from the radiator.
-- Unlock the retaining tab, and remove the cover -1- toward the front.
-- If equipped, remove the center guide profile -A- on the lock carrier -arrows-.
-- Remove the left and right radiator mount catches in direction of -arrows- with a side cutter. Push the upper coolant radiator slightly to the engine.
- The radiator mount will be used again when installing. It is then attached to the lock carrier. Bolts. Refer to the Parts information.
-- Unclip the left and right air duct -2- downward in direction of -arrow B-.
-- Open the left and right retainers in direction of -arrow A-, and disengage the condenser -3- from the charge air cooling circuit cooler -1-.
-- Secure the condenser to the lock carrier.
-- Remove the radiator.
Vehicles With Radiator Versions 1 & 2
-- Press the radiator left and right locking tabs at the same time -arrow- and remove the coolant radiator from the charge air cooling circuit cooler.
Vehicles With Version 3 Radiator
-- Unlock the catches on the radiator for the charge air cooling circuit cooler -1- in direction of -A arrows-.
-- Remove the charge air cooling circuit cooler from the coolant radiator -2- in direction of -arrow B- and disengage in direction of -arrow C-.
-- Remove both radiators.