Coolant Flushing And Filling Device:Vas531007, Connecting:

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Open the coolant reservoir cap -arrow-.

-- Install the test adapter -2- (:VAG1274/8 ) on the coolant expansion tank -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the drain hose -arrow- from the connector coupling -B- on the valve block.

Courtesy of AUDI OF AMERICA, LLC

-- Connect the valve block -1- on the test adapter -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Connect the suction jet pump -2- of the :VAS6096 to the connector coupling -B- on the valve block -1-.

Courtesy of AUDI OF AMERICA, LLC

TIP:

Vacuum can also be generated using the :VAS6096/2 instead of the suction jet pump. Connect the Electric Vacuum Pump and generate a vacuum.