LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (ENGINE ASSEMBLY [4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine] -- (A3)) >> 10 Engine Assembly >> SUBFRAME Mount >> Pendulum Support, Removing And Installing >> Removing

Pendulum Support, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to NOISE INSULATION .

NOTE:

The illustration shows a vehicle with dual-clutch transmission 0D9

GWWA10-11615Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1, 2 and 3- and remove the pendulum support.

scientia non olet · About LEMON Manuals