Installing The Pendulum Support
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of AUDI OF AMERICA, LLC
|
NOTE:
Replace the bolts that were tightened with an additional turn.
-- Tighten the bolts in the steps shown in the sequence:
| Step |
Bolts |
Tightening Specification/Additional Turn |
| 1. |
-2 and 3- |
50 Nm |
| 2. |
-1- |
130 Nm |
| 3. |
-1 to 3- |
90° additional turn |