AWD Vehicles:

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 and 2- and remove the bevel box bracket.

Continuation for All Vehicles:

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

NOTE:

Place a cloth underneath to catch any leaking coolant.

-- Loosen the hose clamps -arrows- and remove the coolant hoses from the transmission fluid cooler.

-- Remove the bolts -1- and move the Transmission Coolant Valve -N488- to the side.

-- Seal the open lines and connections with clean plugs from the :VAS6122 .

-- Attach the hook from the :2024A to the transmission lifting eyes and secure it with the connector lock -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Hook the :VAS6100 with the :10-222A/20 on the :2024A/1 .

-- Remove the bolts -1 to 8- for the transmission/engine connection.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the transmission from the engine.