LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (COOLING SYSTEM [4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI] -- (A3)) >> 19 Cooling System >> Radiator/Radiator Fan >> Radiator, Removing And Installing >> Installing

Radiator, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal And Note The Following: 

NOTE:

If there are small impressions on the slats. Refer to SAFETY PRECAUTIONS WHEN WORKING ON COOLING SYSTEM / COOLER AND CONDENSER ASSEMBLY .

Replace the O-rings.

-- Install the front bumper cover. Refer to FRONT BUMPER COVER, REMOVING AND INSTALLING .

-- Install the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .

-- Connect the coolant hose to the connector coupling. Refer to CONNECT THE COOLANT HOSE TO THE CONNECTOR COUPLING .

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

NOTE:

Used coolant cannot be used again.

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals