Front Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bolts -1 and 3-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the catch -arrow- and remove the cover -2-.

-- Free up the coolant hose -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Open the catches -arrows- and remove the upper air duct -1-.

-- Remove the bolt -arrow- on the left and right.

Courtesy of AUDI OF AMERICA, LLC

-- Unclip and remove the lower section -1- of the air duct.

NOTE:

Lay a cloth below the coolant pipe to catch escaping coolant.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the coolant hoses -1 and 2- with :3094 .

-- Loosen the clamps and remove the coolant hoses.

-- Remove the bolts -arrows- and the front coolant pipe.