Overview - Engine Coolant Temperature Sensor
WARNING: This page is about a different car, the 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Clip
- Installation instructions. Refer to Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING .
- O-ring
- Installation instructions. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
- Engine Coolant Temperature Sensor on Radiator Outlet -G83-
- Depending on the model there are different component locations
- Removing and installing. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
- O-ring
- Always replace after removing
- Coat with coolant
- O-ring
- Always replace after removing
- Coat with coolant
- Bolt
- 4 Nm + 45°
- Always replace after removing
- Engine Coolant Temperature Sensor -G62-
- On transmission side of the cylinder head
- Removing and installing. Refer to Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING .