Sliding Bar Ball, Installing: Installing
WARNING: This page is about a different car, the 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Wear protective eyewear.
-- Insert the spring -1- in the camshaft.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Place the ball -2- on the spring in the camshaft.
-- Push the ball and spring downward in direction of -arrow A- using the :T40191
and hold.
-- Push the sliding bar -3- in direction of -arrow B-.