Vibration Damper, Removing And Installing: Notes

WARNING: This page is about a different car, the 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Counterhold - Vibration Damper :T10355
Wrench - 21mm :T40263
Adapter :T40314
Vibration Damper Assembly Tool :T10531

Individual Components of the Vibration Damper Assembly Tool :T10531 :

Vibration Damper Assembly Tool - Counterhold Tool :T10531/1
Vibration Damper Assembly Tool - Tensioning Pins :T10531/2
Vibration Damper Assembly Tool - Turning Over Tool :T10531/3
Vibration Damper Assembly Tool - Knurled Nut :T10531/4

The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt the chain sprocket must be secured to the crankshaft as described as follows.

Courtesy of AUDI OF AMERICA, LLC