LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (CYLINDER HEAD, VALVETRAIN (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Overview - VALVETRAIN >> Tightening Specification And Sequence For The Camshaft Housing

Tightening Specification And Sequence For The Camshaft Housing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
GWWA15-11306Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in steps in the tightening sequence shown:

Bolts Tightening Specification
-1 through 18- Install by hand all the way
  • The camshaft housing contact surface must lay entirely on top of the cylinder head
-1 through 18- 10 Nm
scientia non olet · About LEMON Manuals