LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (CYLINDER HEAD, VALVETRAIN (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)) >> 15 Cylinder Head, VALVETRAIN >> Toothed Belt Drive >> Toothed Belt Guard, Removing And Installing >> Lower Toothed Belt Guard, Removing And Installing >> Installing

Lower Toothed Belt Guard, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

-- Position the toothed belt guard, pay attention to the alignment pins -arrow- while doing so.

GWWN15-10869Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals