LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (CRANKSHAFT, CYLINDER BLOCK (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)) >> 13 Crankshaft, Cylinder Block >> Piston And Connecting Rod >> Piston Projection, Measuring At TDC >> Cylinder Head Seal Identification

Cylinder Head Seal Identification

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
GWWA15-11309Courtesy of AUDI OF AMERICA, LLC
  1. Part number
  2. Ignore
  3. Holes

TIP

If varying values occur when measuring the projecting end, use the cylinder head gasket for the largest value.