Flywheel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed.
CAUTION:
- When installing, position the bolts by hand and screw in the first threads.
- Do not loosen or tighten the bolts with an impact wrench.
-- Turn the flywheel -A- so that the bolts -B- line up with the center of the holes -arrows-.
-- Insert the :3067 into the hole on the cylinder block -B-, and loosen the flywheel bolts.
-- Remove the bolts and the flywheel.