Sealing Flange, Removing And Installing, Belt Pulley Side: Notes
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Counterhold - Crankshaft Sprocket:3415
- Seal Installer - Crankshaft Seal:T10053
- Applicator Gun:VAS6966
- Hand Drill with Plastic Brush Attachment
- Protective Eyewear
- Sealant. Refer to the Parts Catalog.
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Crankshaft - Toothed Belt Gear