Ribbed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Pay attention to the running direction when reinstalling.

-- Mount the ribbed belt on the ribbed belt pulley .

Courtesy of AUDI OF AMERICA, LLC

Vibration damper
Tensioning roller
Generator
A/C compressor

-- Hold tensioner with wrench and remove the :T10060A .

Courtesy of AUDI OF AMERICA, LLC

-- Release tensioner.

-- Check ribbed belt for correct positioning.

-- Start the engine and check the belt routing.