Overview - Sealing Flange, Belt Pulley Side: Notes
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Sealing Flange, Belt Pulley Side
- Always replace after removing
- With crankshaft seal
- Removing and installing. Refer to SEALING FLANGE, REMOVING AND INSTALLING, BELT PULLEY SIDE .
- Bolt
- Tightening specification and sequence. Refer to RIBBED BELT PULLEY SIDE SEALING FLANGE - TIGHTENING SPECIFICATIONS AND SEQUENCE
- Crankshafts - Toothed Belt Gear
- There must be no oil on the contact surface between the toothed belt sprocket and crankshaft
- Only possible to install in one position
- Bolt
- Tightening specification -item 1- OVERVIEW - TOOTHED BELT .