Throttle Valve Control Module -J338-, Removing And Installing: Notes
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Hose Clamps - Up To 25mm:3094
- Hose Clip Pliers:VAS6362
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Seal - Air guide pipe
- Seal - Connecting piece
- Seals - Throttle valve control module