Throttle Valve Control Module -J338-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install In Reverse Order Of Removal. Note The Following:
-- When installing pay attention to the intake tube with the Throttle Valve Control Module -J338- on the alignment bushings.
-- Install the front upper coolant pipes. Refer to UPPER COOLANT PIPES, REMOVING AND INSTALLING .
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .