Engine Support, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .

-- Vehicles with a left auxiliary radiator: remove the filler tube and the washer fluid reservoir -1-. Refer to WINDSHIELD WIPER SYSTEM .

Courtesy of AUDI OF AMERICA, LLC

-- Lift the engine using the :10-222A/11 -1- to dimension -a-.

Courtesy of AUDI OF AMERICA, LLC

Dimension -a- = approximately 30 mm.

-- Remove the bolts -1, 2 and 3- and the engine support.

Courtesy of AUDI OF AMERICA, LLC